Facebook-f Twitter Instagram Discord Twitch

Dungeonsticks – Submerged Caverns – Wall Packs

If you’re looking to expand your existing kit, put together your own, or replace lost/broken parts, this is the pack for you!

This pack includes 4 of the selected type of wall.

The Mixed Pack contains 2 of each of the different wall types (for a total of 4 walls).

—————————————-

What are DungeonSticks? Here is a description from the artist:

“Tile sets have their place, but for organic caverns they are unruly and hard to use. To that end, I developed DungeonSticks – a “2.5d” terrain system built of walls and entrances to build out your caverns (on top of a battle map/mat, table, etc) with the focus on quick/easy setup, portability, player visibility, and easy printing/painting. The connection system is a simple drop-in rotating joint that requires no additional clips or fastening mechanism, and allows the walls to move to fit organic shapes. The goals of this system are:

– Faster and easier than complete tile sets to print, paint, and setup

Reusable, flexible, and combinable with very minimal teardown / setup

– Easy storage, transportation, and stacking when not in use

– Create a 3rd dimension effect without the need for full floors/walls (by leveraging short walls and full-height doors, columns, etc)

– Offer nearly-zero visual impairment or sight blocking for players on the table.

– Not sacrifice design/aesthetics, but make the pieces beautiful for players to look at and full of detail without overcomplicating painting.

– Harken back to an old-school “runehammer-esque” feel when used on the table.

They are designed to work with 1″ grid systems with limited loss of playable floor space in the interior.”

If you’re looking to expand your existing kit, put together your own, or replace lost/broken parts, this is the pack for you!

This pack includes 4 of the selected type of wall.

The Mixed Pack contains 2 of each of the different wall types (for a total of 4 walls).

—————————————-

What are DungeonSticks? Here is a description from the artist:

“Tile sets have their place, but for organic caverns they are unruly and hard to use. To that end, I developed DungeonSticks – a “2.5d” terrain system built of walls and entrances to build out your caverns (on top of a battle map/mat, table, etc) with the focus on quick/easy setup, portability, player visibility, and easy printing/painting. The connection system is a simple drop-in rotating joint that requires no additional clips or fastening mechanism, and allows the walls to move to fit organic shapes. The goals of this system are:

– Faster and easier than complete tile sets to print, paint, and setup

Reusable, flexible, and combinable with very minimal teardown / setup

– Easy storage, transportation, and stacking when not in use

– Create a 3rd dimension effect without the need for full floors/walls (by leveraging short walls and full-height doors, columns, etc)

– Offer nearly-zero visual impairment or sight blocking for players on the table.

– Not sacrifice design/aesthetics, but make the pieces beautiful for players to look at and full of detail without overcomplicating painting.

– Harken back to an old-school “runehammer-esque” feel when used on the table.

They are designed to work with 1″ grid systems with limited loss of playable floor space in the interior.”

—————————————-

This product was designed by EC3d Designs/Hero’s Hoard. They are a group of very talented artists who create high-quality tabletop terrain and scatter pieces.

We are proud to be a Hero’s Hoard licensed merchant.

$5.99

Free Shipping
On all orders of $35 or more

Related products

Dungeonsticks – Submerged Caverns – Wall Packs

Description

If you’re looking to expand your existing kit, put together your own, or replace lost/broken parts, this is the pack for you!

This pack includes 4 of the selected type of wall.

The Mixed Pack contains 2 of each of the different wall types (for a total of 4 walls).

—————————————-

What are DungeonSticks? Here is a description from the artist:

“Tile sets have their place, but for organic caverns they are unruly and hard to use. To that end, I developed DungeonSticks – a “2.5d” terrain system built of walls and entrances to build out your caverns (on top of a battle map/mat, table, etc) with the focus on quick/easy setup, portability, player visibility, and easy printing/painting. The connection system is a simple drop-in rotating joint that requires no additional clips or fastening mechanism, and allows the walls to move to fit organic shapes. The goals of this system are:

– Faster and easier than complete tile sets to print, paint, and setup

Reusable, flexible, and combinable with very minimal teardown / setup

– Easy storage, transportation, and stacking when not in use

– Create a 3rd dimension effect without the need for full floors/walls (by leveraging short walls and full-height doors, columns, etc)

– Offer nearly-zero visual impairment or sight blocking for players on the table.

– Not sacrifice design/aesthetics, but make the pieces beautiful for players to look at and full of detail without overcomplicating painting.

– Harken back to an old-school “runehammer-esque” feel when used on the table.

They are designed to work with 1″ grid systems with limited loss of playable floor space in the interior.”

—————————————-

This product was designed by EC3d Designs/Hero’s Hoard. They are a group of very talented artists who create high-quality tabletop terrain and scatter pieces.

We are proud to be a Hero’s Hoard licensed merchant.

Additional information

Weight4.0 oz
Dimensions4.0 × 4.0 × 2.0 in
Style

Mixed Wall 4-pack, Wall A 4-pack, Wall B 4-pack

Primary color

Gray

Material

PLA

Scale

Reviews

There are no reviews yet.

Be the first to review “Dungeonsticks – Submerged Caverns – Wall Packs”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The information below applies to most products on this site. Any exceptions will be noted in the individual item descriptions.

Size references (Medium, Large, Huge, etc.) are done at a 28mm(1″) scale using standard D&D rules. This means that minis will have a size commensurate with the diameter of their base:

  • Small/Tiny – 1″ diameter base or smaller (depends on the mini)
  • Medium – 1″ diameter base
  • Large – 2″ diameter base
  • Huge – 3″ diameter base
  • Gargantuan – typically uses a 4″ diameter base. If the base size is different, it will be noted in the listing.

32mm (heroic scale) miniatures may have bases that are slightly larger.

75mm (display scale) miniatures will typically have a base that is around 3″. Models in this size will have their actual dimensions in their description

  • Product images may include renders, special effects, and/or custom paint that may not be indicative of the received product. We will be adding actual photos of the printed objects as we produce them. If you would like us to send a photo of anything in our shop that doesn’t already have one prior to shipping, please let us know and we’ll be happy to oblige.
  • Unless otherwise specified, all products are 3d-printed in gray with either an ABS-like resin or PLA. This ensures the products are durable but still hold their detail
  • We still recommend handling the products with care as many have very fine, delicate features that can still be easily broken
  • Because of the production process, there may be slight variations, indentations, or rough edges that need to be cleaned up before use/painting
  • Some models require assembly, which may involve sanding, filing, and/or fillers for gaps and seams
  • Dice towers are printed hollow with 2.5mm thick walls. This is to ensure that we are able to provide them at a reasonable price but still have enough strength to hold up to use and packing/unpacking at the gaming table.
  • We perform a thorough inspection of every product before it’s shipped to ensure that it is something that we would be proud to display on our own tables.