Yinsylim, The Fallen Paladin

Yinsylim Lichbane is a name that holds reverence across almost any land in Tharador. Almost everyone knows of the Hero of Duskweave, who slew the Lich Kelathar with a single smiting strike and lifted the curse of Duskweave Isle. So when Kelathar rose again after this death seven years later, many questioned the integrity of Yinsylim, including himself. Was he a false hero? Hundreds more died on Kelathar’s reemergence, and it weighed heavily on Yinsylim as his own failure.

Thus he became withdrawn, shutting himself within libraries and reading the histories of known liches and necromancers, swearing an Oath that he would not rest until every resting necromancer’s bones were turned to ash and any that had become Liches were struck down by him and permanently destroyed. None would return to life had he the power to make it so.

Thus in Velandria’s Cathedral of Erdrydion he studied, absorbed in knowledge forbidden from most. There he learnt of a Necromancer named Thomas Bazaar who had been exiled from each one of the Draksborne Empire’s magic schools for his practice of Dark Arts, and adopted the moniker of Tyrin Thirazar to study after his expulsions. It was said he had enthralled the dead in a village in Greypeak some years later, forcing them to do busywork and aid in his experiments within his hidden lab. When he was discovered, Thomas was chased from the settlement with pitchforks and torches when he was found out.

Only one old dusty book mentioned a wizard called Thirazar who was said to be a healer in Mammoth Isle during the middle of the Second Era. Yinsylim tired of reading after this fact, it was never something he was fond of, he instead chose to take action. He chartered a vessel to take him the long journey from Velandria to Mammoth Isle in Tharador’s far north. There he trudged through the cold tundra in search of where the necromancer might be resting, though in his mind whispers seemed to both taunt and guide him until he found the ruins of Koneya Dura, a destroyed Colossal fortress built into the side of a cliff face. Inside he found Thirazar, encased within a thick layer of ice, though the whispers only grew stronger from within.

With his sword Yinsylim struck at the ice, shattering it and knocking Yinsylim unconscious in a blinding explosion of entrapped magic. When he awoke, his will was not his own. His body moved against him and his flesh was seared and sliced: he had been killed. Though in front stood the frozen Lich, skeletal and horrific to behold. Yinsylim became his puppet since, and used the Paladin’s great powers to lay waste to the remote settlements of Mammoth Isle and build Thirazar an army worthy of conquering Tharador.

—————————————-
This product was designed by Dungeon Master Stash for their October 2022 release, The Thawing Dead. They are a group of very talented artists who create high-quality tabletop miniatures and campaign materials.
We are proud to be a DM Stash licensed merchant.

$5.99$7.99

Free Shipping
On all orders of $35 or more

Yinsylim, The Fallen Paladin

Description

Yinsylim Lichbane is a name that holds reverence across almost any land in Tharador. Almost everyone knows of the Hero of Duskweave, who slew the Lich Kelathar with a single smiting strike and lifted the curse of Duskweave Isle. So when Kelathar rose again after this death seven years later, many questioned the integrity of Yinsylim, including himself. Was he a false hero? Hundreds more died on Kelathar’s reemergence, and it weighed heavily on Yinsylim as his own failure.

Thus he became withdrawn, shutting himself within libraries and reading the histories of known liches and necromancers, swearing an Oath that he would not rest until every resting necromancer’s bones were turned to ash and any that had become Liches were struck down by him and permanently destroyed. None would return to life had he the power to make it so.

Thus in Velandria’s Cathedral of Erdrydion he studied, absorbed in knowledge forbidden from most. There he learnt of a Necromancer named Thomas Bazaar who had been exiled from each one of the Draksborne Empire’s magic schools for his practice of Dark Arts, and adopted the moniker of Tyrin Thirazar to study after his expulsions. It was said he had enthralled the dead in a village in Greypeak some years later, forcing them to do busywork and aid in his experiments within his hidden lab. When he was discovered, Thomas was chased from the settlement with pitchforks and torches when he was found out.

Only one old dusty book mentioned a wizard called Thirazar who was said to be a healer in Mammoth Isle during the middle of the Second Era. Yinsylim tired of reading after this fact, it was never something he was fond of, he instead chose to take action. He chartered a vessel to take him the long journey from Velandria to Mammoth Isle in Tharador’s far north. There he trudged through the cold tundra in search of where the necromancer might be resting, though in his mind whispers seemed to both taunt and guide him until he found the ruins of Koneya Dura, a destroyed Colossal fortress built into the side of a cliff face. Inside he found Thirazar, encased within a thick layer of ice, though the whispers only grew stronger from within.

With his sword Yinsylim struck at the ice, shattering it and knocking Yinsylim unconscious in a blinding explosion of entrapped magic. When he awoke, his will was not his own. His body moved against him and his flesh was seared and sliced: he had been killed. Though in front stood the frozen Lich, skeletal and horrific to behold. Yinsylim became his puppet since, and used the Paladin’s great powers to lay waste to the remote settlements of Mammoth Isle and build Thirazar an army worthy of conquering Tharador.

—————————————-
This product was designed by Dungeon Master Stash for their October 2022 release, The Thawing Dead. They are a group of very talented artists who create high-quality tabletop miniatures and campaign materials.
We are proud to be a DM Stash licensed merchant.

Additional information

Weight 2 oz
Dimensions 3 × 3 × 3 in
Color

Gray

Material

ABS-Like Resin

Scale

Size Class (D&D)

Variations

Standing, Mounted

Reviews

There are no reviews yet.

Be the first to review “Yinsylim, The Fallen Paladin”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

The information below applies to most products on this site. Any exceptions will be noted in the individual item descriptions.

Size references (Medium, Large, Huge, etc.) are done at a 28mm(1″) scale using standard D&D rules. This means that minis will have a size commensurate with the diameter of their base:

  • Small/Tiny – 1″ diameter base or smaller (depends on the mini)
  • Medium – 1″ diameter base
  • Large – 2″ diameter base
  • Huge – 3″ diameter base
  • Gargantuan – typically uses a 4″ diameter base. If the base size is different, it will be noted in the listing.

32mm (heroic scale) miniatures may have bases that are slightly larger.

75mm (display scale) miniatures will typically have a base that is around 3″. Models in this size will have their actual dimensions in their description

  • Product images may include renders, special effects, and/or custom paint that may not be indicative of the received product. We will be adding actual photos of the printed objects as we produce them. If you would like us to send a photo of anything in our shop that doesn’t already have one prior to shipping, please let us know and we’ll be happy to oblige.
  • Unless otherwise specified, all products are 3d-printed in gray with either an ABS-like resin or PLA. This ensures the products are durable but still hold their detail
  • We still recommend handling the products with care as many have very fine, delicate features that can still be easily broken
  • Because of the production process, there may be slight variations, indentations, or rough edges that need to be cleaned up before use/painting
  • Some models require assembly, which may involve sanding, filing, and/or fillers for gaps and seams
  • Dice towers are printed hollow with 2.5mm thick walls. This is to ensure that we are able to provide them at a reasonable price but still have enough strength to hold up to use and packing/unpacking at the gaming table.
  • We perform a thorough inspection of every product before it’s shipped to ensure that it is something that we would be proud to display on our own tables.